OZEN 100CF2 100mm Two-Stage Carbon Fiber TripodGive your camera solid feet to stand on with the 100CF2 100mm Carbon Fiber Tripod from OZEN. Designed for use with a separately available 100mm fluid head, this lightweight two-stage tripod supports a payload of 55 pounds and offers working heights ranging from 25.6 to 62.5" using the included, removable mid-level spreader. If you need to go even further up or down, you can replace the included spreader with the separately available Contender heavy-duty mid-level spreader, which gives you a range of 23.6 to 65".For greater rigidity, the 100CF2's molded carbon fiber leg tubes are pin-secured to their anchors—no glued joints. Highly visible twist-lock brakes are used to secure the legs into place. Moreover, the 100CF2 comes equipped with deep-tread rubber feet for better traction on smooth surfaces.Payload capacity of 55 poundsRemovable MLS100 mid-level spreader and deep-tread rubber feetCarbon fiber tubes are pinned to their joints, not gluedFlip-lock brakes are operator-adjustable for wearCompatible with Agile 10, 12, and 15 fluid heads (available separately)OZEN Agile 10S Fluid HeadSmooth your pans and tilts with the Agile 10S Fluid Head from OZEN. Designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 10S is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 10 steps. The Agile 10S's versatile design enables you to quickly change camcorder configurations within a payload range of 2.2 to 26.4 pounds.The Agile 10S is equipped with a 5/5 + 0 fluid drag mechanism and offers a tilt range of 90 to -80°. The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the S-Loc camera mounting interface, which enhances the front-to-rear balance adjustment range to accommodate exceptionally front- or back-heavy camera setups.Ergonomic pan/tilt fluid drag and counterbalance controlsDistinguishable, 90° opposed pan and tilt brakesReplaceable pan bar rosettes for longer fluid head usabilityIlluminated bubble levelConstructed of CNC-machined and anodized aluminum with stainless steel fastenersTelescopic pan bar includedOZEN Soft Case for Heavy-Duty 75mm and 100mm SystemsThe OZEN Soft Case is a replacement case for heavy-duty 75mm and 100mm systems. This is the case typically included with 75AL2HD, 75CF2HD, 100AL2, and 100CF2 tripod systems. The case has an internal pouch for storing a pan bar and carry strap.